PTC-IIIusb-BT with PACTOR III and Bluetooth
Bluetooth interface for wireless connection to Bluetooth enabled PC up to 10 meters away.  The PTC-IIIusb-BT includes a USB interface with certified USB drivers for a wired connection to the modem if needed. PACTOR I, II and III modes enabled, standard. Built-in VHF/UHF Packet (is not multiport capable - see DR-7800 and PTC-IIpro) GPS NMEA data input Transceiver Frequency control for many (most) radio models Same on air performance as all PTC modems in PACTOR I, II & III and Packet modes
The PTC-IIIusb-BT comes with: Installation Guide, USB cable, audio cable (connector at one end, raw wires at the other end), power connector and CD-ROM. Click for modem to radio Cable Reference Chart

Specifications

• Audio input impedance:  47 k
• Audio input level:  10 mVp-p... 2Vp-p
• Audio output impedance:  1 k
• Audio output level:  Max. 3 Vp-p (open circuit), adjustable in 1 mV steps
• Audio processing:  Digital signal processor DSP56303 clocked at 100 MHz 768 kByte additional DSP-RAM for data and program
• Central processor:  Motorola MC68360 QUICC 32 bit CMOS CPU clocked at 25 MHz
• ROM:  Max. 256 kByte, CMOS, FLASH-ROM for easy updates
• RAM:  Static: 2 MByte, CMOS
• System monitoring:  With an internal processor watchdog
• Operating temperature:  -10 to +50 C
• Front panel:  8 LEDs split into various functional groups.  ON / OFF Touch sensor switch
• Rear panel:  Power supply, DIN Socket for transceiver audio, DIN socket for transceiver remote control, GPS connector - 3 wire screw terminal, USB "B" connector
• Power Supply: +10 to +20 V DC, 300 mA max. Reverse polarity protected, Fuse selfresetting
• Dimensions:  Width 4.92" (125) x Height 1.69" (43) x Depth 5.43" (138) mm
• Weight:  15.87 oz (450g)
• Bluetooth interface: Class 2, 25mW max, 4dBm, ~10 meters range